Ambiance Fireplaces INT-200 Specifications download pdf (Page 31)

REMOTE RECEIVER INFORMATION cont.

MANUAL MODE:

This remote can be manually or thermostatically operated.

Press MODE button for manual ON. The flame icon will appear on the LCD

screen. Press MODE button again to put the control into THERMO mode.

Pressing MODE again will turn fireplace OFF.

NOTE: The MODE button operates in a series that will cycle from ON

to THERMO to OFF.

FAN MODE: Operational with INT-200

This remote will operate the fan, allowing for (6) different speed levels. When

the FAN button is pressed, FAN level setting will flash on the LCD screen.

Press UP or DOWN buttons to select desired fan speed level. If no adjust-

ment is made within 7 seconds, the control will exit function setting mode and

LCD display will return to normal view.

NOTE: Delayed ON/OFF - The fan will not turn on until fireplace

has been burning for 5 minutes and will not turn off for 12

minutes after fireplace has been turned off.

EXCEPTION: If fireplace is turned back on during 12 minute off-delay time

frame, the fan will remain on.

This applies to MANUAL and THERMO modes.

LIGHT MODE: Operational with INT-200

This remote will operate the lights, allowing for (6) different light levels.

When LIGHT button is pressed, LIGHT level setting will flash on the LCD

screen. Press UP or DOWN buttons to select desired light level. If no adjust-

ment is made within 7 seconds, the control will exit function setting mode and

LCD display will return to normal view.

NOTE: There is a 3 second delay before light level setting is achieved.

NOTE: Light operations are completely independent from flame and fan

operations.

FLAME MODE:

This remote will operate the flame, allowing for (6) different flame height

levels. When MAIN FLAME button is pressed, FLAME level setting will

flash on the LCD screen. Press UP or DOWN buttons to select desired flame

level. If no adjustment is made within 7 seconds, the control will exit function

setting mode and LCD display will return to normal view.

NOTE: The fireplace will initially light at the highest level. After 5

seconds the flame will adjust to last chosen level before

fireplace was turned OFF.

This applies to MANUAL and THERMO modes.

PAGE 30

Figure 30a

Figure 30d

Figure 30c

Figure 30b

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 47 48

Comments to this Manuals

No comments

Ambiance Fireplaces INT-200 Specifications Page 31

Comments to this Manuals

Related products and manuals for Fireplaces Ambiance Fireplaces INT-200